Skip to content

Ceph Cluster Helm Chart

Creates Rook resources to configure a Ceph cluster using the Helm package manager. This chart is a simple packaging of templates that will optionally create Rook resources such as:

  • CephCluster, CephFilesystem, and CephObjectStore CRs
  • Storage classes to expose Ceph RBD volumes, CephFS volumes, and RGW buckets
  • Ingress for external access to the dashboard
  • Toolbox

Prerequisites

Installing

The helm install command deploys rook on the Kubernetes cluster in the default configuration. The configuration section lists the parameters that can be configured during installation. It is recommended that the rook operator be installed into the rook-ceph namespace. The clusters can be installed into the same namespace as the operator or a separate namespace.

Rook currently publishes builds of this chart to the release and master channels.

Before installing, review the values.yaml to confirm if the default settings need to be updated.

  • If the operator was installed in a namespace other than rook-ceph, the namespace must be set in the operatorNamespace variable.
  • Set the desired settings in the cephClusterSpec. The defaults are only an example and not likely to apply to your cluster.
  • The monitoring section should be removed from the cephClusterSpec, as it is specified separately in the helm settings.
  • The default values for cephBlockPools, cephFileSystems, and CephObjectStores will create one of each, and their corresponding storage classes.
  • All Ceph components now have default values for the pod resources. The resources may need to be adjusted in production clusters depending on the load. The resources can also be disabled if Ceph should not be limited (e.g. test clusters).

Release

The release channel is the most recent release of Rook that is considered stable for the community.

The example install assumes you have first installed the Rook Operator Helm Chart and created your customized values.yaml.

1
2
3
helm repo add rook-release https://charts.rook.io/release
helm install --create-namespace --namespace rook-ceph rook-ceph-cluster \
   --set operatorNamespace=rook-ceph rook-release/rook-ceph-cluster -f values.yaml

Note

--namespace specifies the cephcluster namespace, which may be different from the rook operator namespace.

Configuration

The following table lists the configurable parameters of the rook-operator chart and their default values.

Parameter Description Default
cephBlockPools A list of CephBlockPool configurations to deploy See below
cephBlockPoolsVolumeSnapshotClass Settings for the block pool snapshot class See RBD Snapshots
cephClusterSpec Cluster configuration. See below
cephFileSystemVolumeSnapshotClass Settings for the filesystem snapshot class See CephFS Snapshots
cephFileSystems A list of CephFileSystem configurations to deploy See below
cephObjectStores A list of CephObjectStore configurations to deploy See below
clusterName The metadata.name of the CephCluster CR The same as the namespace
configOverride Cluster ceph.conf override nil
ingress.dashboard Enable an ingress for the ceph-dashboard {}
kubeVersion Optional override of the target kubernetes version nil
monitoring.createPrometheusRules Whether to create the Prometheus rules for Ceph alerts false
monitoring.enabled Enable Prometheus integration, will also create necessary RBAC rules to allow Operator to create ServiceMonitors. Monitoring requires Prometheus to be pre-installed false
monitoring.prometheusRule.annotations Annotations applied to PrometheusRule {}
monitoring.prometheusRule.labels Labels applied to PrometheusRule {}
monitoring.rulesNamespaceOverride The namespace in which to create the prometheus rules, if different from the rook cluster namespace. If you have multiple rook-ceph clusters in the same k8s cluster, choose the same namespace (ideally, namespace with prometheus deployed) to set rulesNamespaceOverride for all the clusters. Otherwise, you will get duplicate alerts with multiple alert definitions. nil
operatorNamespace Namespace of the main rook operator "rook-ceph"
pspEnable Create & use PSP resources. Set this to the same value as the rook-ceph chart. false
toolbox.affinity Toolbox affinity {}
toolbox.enabled Enable Ceph debugging pod deployment. See toolbox false
toolbox.image Toolbox image, defaults to the image used by the Ceph cluster nil
toolbox.priorityClassName Set the priority class for the toolbox if desired nil
toolbox.resources Toolbox resources {"limits":{"cpu":"500m","memory":"1Gi"},"requests":{"cpu":"100m","memory":"128Mi"}}
toolbox.tolerations Toolbox tolerations []

Ceph Cluster Spec

The CephCluster CRD takes its spec from cephClusterSpec.*. This is not an exhaustive list of parameters. For the full list, see the Cluster CRD topic.

The cluster spec example is for a converged cluster where all the Ceph daemons are running locally, as in the host-based example (cluster.yaml). For a different configuration such as a PVC-based cluster (cluster-on-pvc.yaml), external cluster (cluster-external.yaml), or stretch cluster (cluster-stretched.yaml), replace this entire cephClusterSpec with the specs from those examples.

Ceph Block Pools

The cephBlockPools array in the values file will define a list of CephBlockPool as described in the table below.

Parameter Description Default
name The name of the CephBlockPool ceph-blockpool
spec The CephBlockPool spec, see the CephBlockPool documentation. {}
storageClass.enabled Whether a storage class is deployed alongside the CephBlockPool true
storageClass.isDefault Whether the storage class will be the default storage class for PVCs. See PersistentVolumeClaim documentation for details. true
storageClass.name The name of the storage class ceph-block
storageClass.parameters See Block Storage documentation or the helm values.yaml for suitable values see values.yaml
storageClass.reclaimPolicy The default Reclaim Policy to apply to PVCs created with this storage class. Delete
storageClass.allowVolumeExpansion Whether volume expansion is allowed by default. true
storageClass.mountOptions Specifies the mount options for storageClass []
storageClass.allowedTopologies Specifies the allowedTopologies for storageClass []

Ceph File Systems

The cephFileSystems array in the values file will define a list of CephFileSystem as described in the table below.

Parameter Description Default
name The name of the CephFileSystem ceph-filesystem
spec The CephFileSystem spec, see the CephFilesystem CRD documentation. see values.yaml
storageClass.enabled Whether a storage class is deployed alongside the CephFileSystem true
storageClass.name The name of the storage class ceph-filesystem
storageClass.pool The name of Data Pool, without the filesystem name prefix data0
storageClass.parameters See Shared Filesystem documentation or the helm values.yaml for suitable values see values.yaml
storageClass.reclaimPolicy The default Reclaim Policy to apply to PVCs created with this storage class. Delete
storageClass.mountOptions Specifies the mount options for storageClass []

Ceph Object Stores

The cephObjectStores array in the values file will define a list of CephObjectStore as described in the table below.

Parameter Description Default
name The name of the CephObjectStore ceph-objectstore
spec The CephObjectStore spec, see the CephObjectStore CRD documentation. see values.yaml
storageClass.enabled Whether a storage class is deployed alongside the CephObjectStore true
storageClass.name The name of the storage class ceph-bucket
storageClass.parameters See Object Store storage class documentation or the helm values.yaml for suitable values see values.yaml
storageClass.reclaimPolicy The default Reclaim Policy to apply to PVCs created with this storage class. Delete
ingress.enabled Enable an ingress for the object store false
ingress.annotations Ingress annotations {}
ingress.host.name Ingress hostname ""
ingress.host.path Ingress path prefix /
ingress.tls Ingress tls /
ingress.ingressClassName Ingress tls ""

Existing Clusters

If you have an existing CephCluster CR that was created without the helm chart and you want the helm chart to start managing the cluster:

  1. Extract the spec section of your existing CephCluster CR and copy to the cephClusterSpec section in values.yaml.

  2. Add the following annotations and label to your existing CephCluster CR:

1
2
3
4
5
  annotations:
    meta.helm.sh/release-name: rook-ceph-cluster
    meta.helm.sh/release-namespace: rook-ceph
  labels:
    app.kubernetes.io/managed-by: Helm
  1. Run the helm install command in the Installing section to create the chart.

  2. In the future when updates to the cluster are needed, ensure the values.yaml always contains the desired CephCluster spec.

Development Build

To deploy from a local build from your development environment:

cd deploy/charts/rook-ceph-cluster
helm install --create-namespace --namespace rook-ceph rook-ceph-cluster -f values.yaml .

Uninstalling the Chart

To see the currently installed Rook chart:

helm ls --namespace rook-ceph

To uninstall/delete the rook-ceph-cluster chart:

helm delete --namespace rook-ceph rook-ceph-cluster

The command removes all the Kubernetes components associated with the chart and deletes the release. Removing the cluster chart does not remove the Rook operator. In addition, all data on hosts in the Rook data directory (/var/lib/rook by default) and on OSD raw devices is kept. To reuse disks, you will have to wipe them before recreating the cluster.

See the teardown documentation for more information.