Ceph

    PLEASE NOTE: This document applies to v1.1 version and not to the latest stable release v1.9

    Ceph Storage Quickstart

    This guide will walk you through the basic setup of a Ceph cluster and enable you to consume block, object, and file storage from other pods running in your cluster.

    Minimum Version

    Kubernetes v1.10 or higher is supported by Rook.

    Prerequisites

    To make sure you have a Kubernetes cluster that is ready for Rook, you can follow these instructions.

    If you are using dataDirHostPath to persist rook data on kubernetes hosts, make sure your host has at least 5GB of space available on the specified path.

    TL;DR

    If you’re feeling lucky, a simple Rook cluster can be created with the following kubectl commands and example yaml files. For the more detailed install, skip to the next section to deploy the Rook operator.

    cd cluster/examples/kubernetes/ceph
    kubectl create -f common.yaml
    kubectl create -f operator.yaml
    kubectl create -f cluster-test.yaml
    

    After the cluster is running, you can create block, object, or file storage to be consumed by other applications in your cluster.

    Production Environments

    For production environments it is required to have local storage devices attached to your nodes. In this walkthrough, the requirement of local storage devices is relaxed so you can get a cluster up and running as a “test” environment to experiment with Rook. A Ceph filestore OSD will be created in a directory instead of requiring a device. For production environments, you will want to follow the example in cluster.yaml instead of cluster-test.yaml in order to configure the devices instead of test directories. See the Ceph examples for more details.

    Deploy the Rook Operator

    The first step is to deploy the Rook operator. Check that you are using the example yaml files that correspond to your release of Rook. For more options, see the examples documentation.

    cd cluster/examples/kubernetes/ceph
    kubectl create -f common.yaml
    kubectl create -f operator.yaml
    
    # verify the rook-ceph-operator is in the `Running` state before proceeding
    kubectl -n rook-ceph get pod
    

    You can also deploy the operator with the Rook Helm Chart.

    Create a Rook Ceph Cluster

    Now that the Rook operator is running we can create the Ceph cluster. For the cluster to survive reboots, make sure you set the dataDirHostPath property that is valid for your hosts. For more settings, see the documentation on configuring the cluster.

    Save the cluster spec as cluster-test.yaml:

    apiVersion: ceph.rook.io/v1
    kind: CephCluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      cephVersion:
        # For the latest ceph images, see https://hub.docker.com/r/ceph/ceph/tags
        image: ceph/ceph:v14.2.4-20190917
      dataDirHostPath: /var/lib/rook
      mon:
        count: 3
      dashboard:
        enabled: true
      storage:
        useAllNodes: true
        useAllDevices: false
        # Important: Directories should only be used in pre-production environments
        directories:
        - path: /var/lib/rook
    
    

    Create the cluster:

    kubectl create -f cluster-test.yaml
    

    Use kubectl to list pods in the rook-ceph namespace. You should be able to see the following pods once they are all running. The number of osd pods will depend on the number of nodes in the cluster and the number of devices and directories configured. If you did not modify the cluster-test.yaml above, it is expected that one OSD will be created per node. The rook-ceph-agent and rook-discover pods are also optional depending on your settings.

    $ kubectl -n rook-ceph get pod
    NAME                                   READY   STATUS      RESTARTS   AGE
    rook-ceph-agent-4zkg8                  1/1     Running     0          140s
    rook-ceph-mgr-a-d9dcf5748-5s9ft        1/1     Running     0          77s
    rook-ceph-mon-a-7d8f675889-nw5pl       1/1     Running     0          105s
    rook-ceph-mon-b-856fdd5cb9-5h2qk       1/1     Running     0          94s
    rook-ceph-mon-c-57545897fc-j576h       1/1     Running     0          85s
    rook-ceph-operator-6c49994c4f-9csfz    1/1     Running     0          141s
    rook-ceph-osd-0-7cbbbf749f-j8fsd       1/1     Running     0          23s
    rook-ceph-osd-1-7f67f9646d-44p7v       1/1     Running     0          24s
    rook-ceph-osd-2-6cd4b776ff-v4d68       1/1     Running     0          25s
    rook-ceph-osd-prepare-node1-vx2rz      0/2     Completed   0          60s
    rook-ceph-osd-prepare-node2-ab3fd      0/2     Completed   0          60s
    rook-ceph-osd-prepare-node3-w4xyz      0/2     Completed   0          60s
    rook-discover-dhkb8                    1/1     Running     0          140s
    

    To verify that the cluster is in a healthy state, connect to the Rook toolbox and run the ceph status command.

    • All mons should be in quorum
    • A mgr should be active
    • At least one OSD should be active
    • If the health is not HEALTH_OK, the warnings or errors should be investigated
      $ ceph status
      cluster:
        id:     a0452c76-30d9-4c1a-a948-5d8405f19a7c
        health: HEALTH_OK
      
      services:
        mon: 3 daemons, quorum a,b,c (age 3m)
        mgr: a(active, since 2m)
        osd: 3 osds: 3 up (since 1m), 3 in (since 1m)
      ...
      

    If the cluster is not healthy, please refer to the Ceph common issues for more details and potential solutions.

    Storage

    For a walkthrough of the three types of storage exposed by Rook, see the guides for:

    • Block: Create block storage to be consumed by a pod
    • Object: Create an object store that is accessible inside or outside the Kubernetes cluster
    • Shared File System: Create a file system to be shared across multiple pods

    Ceph Dashboard

    Ceph has a dashboard in which you can view the status of your cluster. Please see the dashboard guide for more details.

    Tools

    We have created a toolbox container that contains the full suite of Ceph clients for debugging and troubleshooting your Rook cluster. Please see the toolbox readme for setup and usage information. Also see our advanced configuration document for helpful maintenance and tuning examples.

    Monitoring

    Each Rook cluster has some built in metrics collectors/exporters for monitoring with Prometheus. To learn how to set up monitoring for your Rook cluster, you can follow the steps in the monitoring guide.

    Teardown

    When you are done with the test cluster, see these instructions to clean up the cluster.