Ceph

    PLEASE NOTE: This document applies to v0.8 version and not to the latest stable release v1.9

    Ceph Cluster CRD

    Rook allows creation and customization of storage clusters through the custom resource definitions (CRDs).

    Sample

    To get you started, here is a simple example of a CRD to configure a Ceph cluster with all nodes and all devices. More examples are included later in this doc.

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      storage:
        useAllNodes: true
        useAllDevices: true
    

    In addition to the CRD, you will also need to create a namespace, role, and role binding as seen in the common cluster resources below.

    Settings

    Settings can be specified at the global level to apply to the cluster as a whole, while other settings can be specified at more fine-grained levels. If any setting is unspecified, a suitable default will be used automatically.

    Cluster metadata

    • name: The name that will be used internally for the Ceph cluster. Most commonly the name is the same as the namespace since multiple clusters are not supported in the same namespace.
    • namespace: The Kubernetes namespace that will be created for the Rook cluster. The services, pods, and other resources created by the operator will be added to this namespace. The common scenario is to create a single Rook cluster. If multiple clusters are created, they must not have conflicting devices or host paths.

    Cluster Settings

    • dataDirHostPath: The path on the host (hostPath) where config and data should be stored for each of the services. If the directory does not exist, it will be created. Because this directory persists on the host, it will remain after pods are deleted.
      • On Minikube environments, use /data/rook. Minikube boots into a tmpfs but it provides some directories where files can be persisted across reboots. Using one of these directories will ensure that Rook’s data and configuration files are persisted and that enough storage space is available.
      • WARNING: For test scenarios, if you delete a cluster and start a new cluster on the same hosts, the path used by dataDirHostPath must be deleted. Otherwise, stale keys and other config will remain from the previous cluster and the new mons will fail to start. If this value is empty, each pod will get an ephemeral directory to store their config files that is tied to the lifetime of the pod running on that node. More details can be found in the Kubernetes empty dir docs.
    • dashboard: Settings for the Ceph dashboard. To view the dashboard in your browser see the dashboard guide.
      • enabled: Whether to enable the dashboard to view cluster status
    • serviceAccount: The service account under which the OSD pods will run that will give access to ConfigMaps in the cluster’s namespace. If not set, the default of rook-ceph-cluster will be used.
    • network: The network settings for the cluster
      • hostNetwork: uses network of the hosts instead of using the SDN below the containers.
    • mon: contains mon related options mon settings For more details on the mons and when to choose a number other than 3, see the mon health design doc.
    • placement: placement configuration settings
    • resources: resources configuration settings
    • storage: Storage selection and configuration that will be used across the cluster. Note that these settings can be overridden for specific nodes.
      • useAllNodes: true or false, indicating if all nodes in the cluster should be used for storage according to the cluster level storage selection and configuration values. If individual nodes are specified under the nodes field below, then useAllNodes must be set to false.
      • nodes: Names of individual nodes in the cluster that should have their storage included in accordance with either the cluster level configuration specified above or any node specific overrides described in the next section below. useAllNodes must be set to false to use specific nodes and their config.
      • storage selection settings
      • storage configuration settings

    Node Updates

    Nodes can be added and removed over time by updating the Cluster CRD, for example with kubectl -n rook-ceph edit cluster.ceph.rook.io rook-ceph. This will bring up your default text editor and allow you to add and remove storage nodes from the cluster. This feature is only available when useAllNodes has been set to false.

    Mon Settings

    • count: set the number of mons to be started. The number should be odd and between 1 and 9. If not specified the default is set to 3 and allowMultiplePerNode is also set to true.
    • allowMultiplePerNode: enable (true) or disable (false) the placement of multiple mons on one node. Default is false.

    Node Settings

    In addition to the cluster level settings specified above, each individual node can also specify configuration to override the cluster level settings and defaults. If a node does not specify any configuration then it will inherit the cluster level settings.

    Storage Selection Settings

    Below are the settings available, both at the cluster and individual node level, for selecting which storage resources will be included in the cluster.

    • useAllDevices: true or false, indicating whether all devices found on nodes in the cluster should be automatically consumed by OSDs. Not recommended unless you have a very controlled environment where you will not risk formatting of devices with existing data. When true, all devices will be used except those with partitions created or a local filesystem. Is overridden by deviceFilter if specified.
    • deviceFilter: A regular expression that allows selection of devices to be consumed by OSDs. If individual devices have been specified for a node then this filter will be ignored. This field uses golang regular expression syntax. For example:
      • sdb: Only selects the sdb device if found
      • ^sd.: Selects all devices starting with sd
      • ^sd[a-d]: Selects devices starting with sda, sdb, sdc, and sdd if found
      • ^s: Selects all devices that start with s
      • ^[^r]: Selects all devices that do not start with r
    • devices: A list of individual device names belonging to this node to include in the storage cluster.
      • name: The name of the device (e.g., sda).
      • config: Device-specific config settings. See the config settings below.
    • directories: A list of directory paths that will be included in the storage cluster. Note that using two directories on the same physical device can cause a negative performance impact.
      • path: The path on disk of the directory (e.g., /rook/storage-dir).
      • config: Directory-specific config settings. See the config settings below.
    • location: Location information about the cluster to help with data placement, such as region or data center. This is directly fed into the underlying Ceph CRUSH map. More information on CRUSH maps can be found in the ceph docs.

    OSD Configuration Settings

    The following storage selection settings are specific to Ceph and do not apply to other backends. All variables are key-value pairs represented as strings.

    • metadataDevice: Name of a device to use for the metadata of OSDs on each node. Performance can be improved by using a low latency device (such as SSD or NVMe) as the metadata device, while other spinning platter (HDD) devices on a node are used to store data.
    • storeType: filestore or bluestore, the underlying storage format to use for each OSD. The default is set dynamically to bluestore for devices, while filestore is the default for directories. Set this store type explicitly to override the default. Warning: Bluestore is not recommended for directories in production. Bluestore does not purge data from the directory and over time will grow without the ability to compact or shrink.
    • databaseSizeMB: The size in MB of a bluestore database. Include quotes around the size.
    • walSizeMB: The size in MB of a bluestore write ahead log (WAL). Include quotes around the size.
    • journalSizeMB: The size in MB of a filestore journal. Include quotes around the size.

    Placement Configuration Settings

    Placement configuration for the cluster services. It includes the following keys: mgr, mon, osd and all. Each service will have its placement configuration generated by merging the generic configuration under all with the most specific one (which will override any attributes).

    A Placement configuration is specified (according to the kubernetes PodSpec) as:

    The mon pod does not allow Pod affinity or anti-affinity. This is because of the mons having built-in anti-affinity with each other through the operator. The operator chooses which nodes are to run a mon on. Each mon is then tied to a node with a node selector using a hostname. See the mon design doc for more details on the mon failover design.

    Cluster-wide Resources Configuration Settings

    Resources should be specified so that the rook components are handled after Kubernetes Pod Quality of Service classes. This allows to keep rook components running when for example a node runs out of memory and the rook components are not killed depending on their Quality of Service class.

    You can set resource requests/limits for rook components through the Resource Requirements/Limits structure in the following keys:

    • mgr: Set resource requests/limits for MGRs.
    • mon: Set resource requests/limits for Mons.
    • osd: Set resource requests/limits for OSDs.

    Resource Requirements/Limits

    For more information on resource requests/limits see the official Kubernetes documentation: Kubernetes - Managing Compute Resources for Containers

    • requests: Requests for cpu or memory.
      • cpu: Request for CPU (example: one CPU core 1, 50% of one CPU core 500m).
      • memory: Limit for Memory (example: one gigabyte of memory 1Gi, half a gigabyte of memory 512Mi).
    • limits: Limits for cpu or memory.
      • cpu: Limit for CPU (example: one CPU core 1, 50% of one CPU core 500m).
      • memory: Limit for Memory (example: one gigabyte of memory 1Gi, half a gigabyte of memory 512Mi).

    Samples

    Here are several samples for configuring Ceph clusters. Each of the samples must also include the namespace and corresponding access granted for management by the Ceph operator. See the common cluster resources below.

    Storage configuration: All devices

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      network:
        hostNetwork: false
      dashboard:
        enabled: true
      # cluster level storage configuration and selection
      storage:
        useAllNodes: true
        useAllDevices: true
        deviceFilter:
        location:
        config:
          metadataDevice:
          databaseSizeMB: "1024" # this value can be removed for environments with normal sized disks (100 GB or larger)
          journalSizeMB: "1024"  # this value can be removed for environments with normal sized disks (20 GB or larger)
    

    Storage Configuration: Specific devices

    Individual nodes and their config can be specified so that only the named nodes below will be used as storage resources. Each node’s ‘name’ field should match their ‘kubernetes.io/hostname’ label.

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      network:
        hostNetwork: false
      dashboard:
        enabled: true
      # cluster level storage configuration and selection
      storage:
        useAllNodes: false
        useAllDevices: false
        deviceFilter:
        location:
        config:
          metadataDevice:
          databaseSizeMB: "1024" # this value can be removed for environments with normal sized disks (100 GB or larger)
          journalSizeMB: "1024"  # this value can be removed for environments with normal sized disks (20 GB or larger)
        nodes:
        - name: "172.17.4.101"
          directories:         # specific directories to use for storage can be specified for each node
          - path: "/rook/storage-dir"
        - name: "172.17.4.201"
          devices:             # specific devices to use for storage can be specified for each node
          - name: "sdb"
          - name: "sdc"
          config:         # configuration can be specified at the node level which overrides the cluster level config
            storeType: bluestore
        - name: "172.17.4.301"
          deviceFilter: "^sd."
    

    Storage Configuration: Cluster wide Directories

    This example is based up on the Storage Configuration: Specific devices. Individual nodes can override the cluster wide specified directories list.

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      network:
        hostNetwork: false
      dashboard:
        enabled: true
      # cluster level storage configuration and selection
      storage:
        useAllNodes: false
        useAllDevices: false
        config:
          databaseSizeMB: "1024" # this value can be removed for environments with normal sized disks (100 GB or larger)
          journalSizeMB: "1024"  # this value can be removed for environments with normal sized disks (20 GB or larger)
        directories:
        - path: "/rook/storage-dir"
        nodes:
        - name: "172.17.4.101"
          directories: # specific directories to use for storage can be specified for each node
          # overrides the above `directories` values for this node
          - path: "/rook/my-node-storage-dir"
        - name: "172.17.4.201"
    

    Node Affinity

    To control where various services will be scheduled by kubernetes, use the placement configuration sections below. The example under ‘all’ would have all services scheduled on kubernetes nodes labeled with ‘role=storage’ and tolerate taints with a key of ‘storage-node’.

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      network:
        hostNetwork: false
      dashboard:
        enabled: true
      placement:
        all:
          nodeAffinity:
            requiredDuringSchedulingIgnoredDuringExecution:
              nodeSelectorTerms:
              - matchExpressions:
                - key: role
                  operator: In
                  values:
                  - storage-node
          tolerations:
          - key: storage-node
            operator: Exists
        mgr:
          nodeAffinity:
          tolerations:
        mon:
          nodeAffinity:
          tolerations:
        osd:
          nodeAffinity:
          tolerations:
    

    Resource requests/Limits

    To control how many resources the rook components can request/use, you can set requests and limits in Kubernetes for them. You can override these requests/limits for OSDs per node when using useAllNodes: false in the node item in the nodes list.

    WARNING Before setting resource requests/limits, please take a look at the Ceph documentation for recommendations for each component: Ceph - Hardware Recommendations.

    apiVersion: ceph.rook.io/v1beta1
    kind: Cluster
    metadata:
      name: rook-ceph
      namespace: rook-ceph
    spec:
      dataDirHostPath: /var/lib/rook
      serviceAccount: rook-ceph-cluster
      # cluster level resource requests/limits configuration
      resources:
      storage:
        useAllNodes: false
        nodes:
        - name: "172.17.4.201"
          resources:
            limits:
              cpu: "2"
              memory: "4096Mi"
            requests:
              cpu: "2"
              memory: "4096Mi"
    

    Common Cluster Resources

    Each Ceph cluster must be created in a namespace and also give access to the Rook operator to manage the cluster in the namespace. Creating the namespace and these controls must be added to each of the examples previously shown.

    apiVersion: v1
    kind: Namespace
    metadata:
      name: rook-ceph
    ---
    apiVersion: v1
    kind: ServiceAccount
    metadata:
      name: rook-ceph-cluster
      namespace: rook-ceph
    ---
    kind: Role
    apiVersion: rbac.authorization.k8s.io/v1beta1
    metadata:
      name: rook-ceph-cluster
      namespace: rook-ceph
    rules:
    - apiGroups: [""]
      resources: ["configmaps"]
      verbs: [ "get", "list", "watch", "create", "update", "delete" ]
    ---
    # Allow the operator to create resources in this cluster's namespace
    kind: RoleBinding
    apiVersion: rbac.authorization.k8s.io/v1beta1
    metadata:
      name: rook-ceph-cluster-mgmt
      namespace: rook-ceph
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: ClusterRole
      name: rook-ceph-cluster-mgmt
    subjects:
    - kind: ServiceAccount
      name: rook-ceph-system
      namespace: rook-ceph-system
    ---
    # Allow the pods in this namespace to work with configmaps
    kind: RoleBinding
    apiVersion: rbac.authorization.k8s.io/v1beta1
    metadata:
      name: rook-ceph-cluster
      namespace: rook-ceph
    roleRef:
      apiGroup: rbac.authorization.k8s.io
      kind: Role
      name: rook-ceph-cluster
    subjects:
    - kind: ServiceAccount
      name: rook-ceph-cluster
      namespace: rook-ceph